- Home
- Occupations
- NOC codes
- NOC 94123
NOC 94123: Lumber graders and other wood processing inspectors and graders
NOC 94123 is a TEER 4 occupation. TEER 4 and 5 work does not count for Express Entry, but some provincial and pilot programs accept it.
Is this your code?
Lumber graders and other wood processing inspectors and graders inspect and grade lumber, shingles, veneer, waferboard and similar wood products to identify defects, ensure conformance to company specifications and classify products according to industry standards. They are employed by sawmills, planing mills, wood treatment plants, waferboard plants and other wood processing companies.
Job titles filed under this code
Official example titles
- grader - wood processing
- grader tallyman/woman - wood processing
- lumber grader
- particleboard grader - wood processing
- plywood grader
- plywood inspector
- veneer grader
- wood measurer
Not this code
Close occupations that have their own code
Main duties
This group performs some or all of the following duties:
Lumber graders
- Examine lumber visually for knots, holes, splits and other defects and sort for further drying, trimming or remanufacturing
- Measure lumber using callipers, gauges and tape measures to ensure specified thickness, length and width
- Classify and sort lumber according to industry standards and stamp lumber to indicate grade, wood type, moisture level and other characteristics
- Tally lumber
- Complete and maintain reports.
Other wood processing inspectors and graders
- Inspect plywood panels, veneer sheets, panelboards, shingles and similar wood products visually for knots, holes, splits, straightness and other defects
- Mark defects and sort for repair or reprocessing
- Measure wood products to ensure conformance to specifications using standard measuring instruments
- Grade and label wood products according to quality standards
- Complete and maintain inspection and grading reports.
What this code means for Express Entry
FSW needs TEER 0–3 work.
CEC needs TEER 0–3 work.
Not in a Federal Skilled Trades group.
Check your eligibility with this code → Find pathways for this occupation
The code is carried into every tool on this site, so you only enter it once.
Employment requirements
- Completion of secondary school is usually required.
- On-the-job training and up to two weeks of classroom training are provided for lumber graders.
- Previous experience as a sawmill machine operator, other wood processing operator or as a labourer in wood processing is usually required for graders and inspectors in this unit group.
- Lumber graders require a lumber grader's licence issued by a provincial lumber association.
Good to know
- There is some mobility between employers processing similar wood products.
Codes in the same group
Official sources
- noc.esdc.gc.caNOC 2021 Version 1.0: 94123 Lumber graders and other wood processing inspectors and graders
- statcan.gc.caStatistics Canada: National Occupational Classification (NOC) 2021 Version 1.0
- canada.caIRCC: Find your National Occupational Classification (NOC)
- canada.caIRCC: Express Entry, who can apply