NOC 2021 · 94203 · TEER 4

NOC 94203: Assemblers, fabricators and inspectors, industrial electrical motors and transformers

NOC 94203 is a TEER 4 occupation. TEER 4 and 5 work does not count for Express Entry, but some provincial and pilot programs accept it.

Last checked against official sources 2026-10-01

TEER level

—

Express Entry programs that accept it

2026 Express Entry categories

121

Official job titles under this code

Is this your code?

Assemblers, fabricators and inspectors of industrial electrical motors and transformers assemble, fabricate, fit, wire and inspect heavy-duty industrial electrical equipment. They are employed by manufacturers of industrial electric motors, transformers, control equipment, railway locomotives, transit vehicles and other heavy electrical equipment.

IRCC goes by what you actually did, not by your job title: your work must match the description above and most of the main duties below. Compare them with your reference letter line by line.

Job titles filed under this code

Official example titles

alternating current (AC) and direct current (DC) motor inspector and tester
alternating current (AC) and direct current (DC) motors fitter-assembler
control panel assembler
electrical control panel inspector
electrical fitter
electrical switchgear panel wirer
motor and generator assembler and wirer
panelboard assembler - industrial electrical equipment
power transformer assembler
switchgear and control panel assembler - industrial electrical equipment
switchgear fitter-wirer
transformer coil winder
transformer inspector
transformer winder

Search all 121 official titles for this code →

Not this code

Close occupations that have their own code

Assemblers and inspectors, electrical appliance, apparatus and equipment manufacturing → 94202
Electrical and electronics engineering technologists and technicians → 22310
Electrical mechanics → 72422
Supervisors, electronics and electrical products manufacturing → 92021

Main duties

This group performs some or all of the following duties:

Assemblers

Assemble and fit metal and other prefabricated parts to close tolerances according to blueprints to build heavy-duty electric motors or transformers
Assemble stators or armatures for heavy-duty electric motors; compress steel laminations to build transformer cores; assemble windings into core using overhead cranes and make electrical connections using crimping, brazing and soldering equipment
Assemble and fit electrical motor or transformer auxiliary equipment such as bushings, tap changes, conduit boxes, heating devices, protective equipment and cooling equipment
Set up and adjust production machinery and equipment, such as coil winding machines, for the manufacture of heavy-duty electrical equipment
May perform basic tests on electric motors.

Electrical fitters and wirers

Interpret engineering drawings, electrical schematics and blueprints
Fit motor starters, contactors, capacitors, circuit breakers, voltage regulators, printed circuit boards or other electrical control devices into switchboards and panelboards to produce automated processing control equipment, electrical distribution panels, or other industrial electrical control equipment
Wire electrical connections for switchboards and panelboards
Assemble panelboard and switchboard cabinets and install bus bars used to carry heavy electrical current
May operate metal fabricating equipment to fabricate or modify bus bars.

Inspectors

Monitor production and troubleshoot production problems
Check final assembly of electric motors, transformers or control equipment for adherence to quality control standards
Collect, record and summarize inspection results.

What this code means for Express Entry

FSWNot accepted

FSW needs TEER 0–3 work.

CECNot accepted

CEC needs TEER 0–3 work.

FSTNot accepted

Not in a Federal Skilled Trades group.

TEER 4 and 5 work does not count for Express Entry. Some provincial nominee streams and federal pilots accept it. Browse pathways →

Check your eligibility with this code → Find pathways for this occupation

The code is carried into every tool on this site, so you only enter it once.

Employment requirements

Completion of secondary school is usually required.
College courses in electricity or electro-technology may be required.
Several years of on-the-job training are usually provided.
Set-up persons, inspectors and leadhands in this unit group may require experience as an assembler, fitter or wirer in the same company.

Good to know

Progression to supervisory positions is possible with experience.

Codes in the same group

NOC	Occupation	TEER
94200	Motor vehicle assemblers, inspectors and testers	4
94201	Electronics assemblers, fabricators, inspectors and testers	4
94202	Assemblers and inspectors, electrical appliance, apparatus and equipment manufacturing	4
94204	Mechanical assemblers and inspectors	4
94205	Machine operators and inspectors, electrical apparatus manufacturing	4